Introducing the new V4L Handle mod
On Saturday, Vapor4Life added a new mod to their existing OMG mod product line. The line also includes the OMG All Day and OMG VV. The V4L Handle is KR808-D1-threaded and is compatible with both Vapor4Life’s CoolCarts and WOW carts, as well as Vapor4Life’s 3.5ml and 6ml tanks. The name “Handle” comes from the shape of this box mod. It has three ridges on the side so it fits comfortably in the user’s hand. The mod is lightweight, available in black, green, magenta, and blue and comes in an elegant package with a battery, battery charger, and instruction manual.
The V4L Handle features variable voltage between 3.0-6.0 volts, which means the user regulates the voltage it provides. The voltage changes from 3.0-6.0 volts in increments of 0.1 volts. The mod is a shell that houses a 2800mah 18650 battery. It has several built-in safety features such as short-circuit protection and a vent hole on the side of the mod. Another safety feature is not functioning if the battery charge gets too low. The V4L Handle operates with single coil loads from 1.5-5ohms and dual coil loads from 1.5-3ohms. The device also features upgraded wiring, built to Milin’s modifications and Vapor4Life’s high quality standards. The activation button and power up and down buttons are very responsive.
- 2800mah 18650 battery
- KR808D-1 threaded
- 3.0-6.0 volts variable voltage
- Built-in safety features
To turn on or off the V4L Handle, simply press the small round button on the side of the mod five times. When the mod is on, the current resistance will be displayed. The brightness on the display may be adjusted by pressing the minus sign button and plus sign button simultaneously for a few seconds. When the display reads €˜on’, the voltage may be varied by pressing the minus and plus sign buttons. The user must press the large round button on the top of the V4L Handle to activate the mod to begin working.
Be sure to check back later this week when ecig expert Morandir shares the V4L Handle’s technical information!