There are many different ways to charge a V4L e-cigarette battery. The different options available are: the Vapor King Wall Charger, the Vapor King USB Charger, the Vapor King Car Adapter and the Vapor King PCC (Portable Charging Case).
Vapor King Wall Charger
The most basic charging option is the Vapor King Wall Charger. Simply screw the threaded end of your battery into the hole at the top of the charger. Then, plug the charger cable into the bottom of the charger and insert the plug into a standard wall outlet. The LED tip at the end of the battery will blink several times and the indicator light on the charger will turn red. The battery will take approximately four to five hours to charge. When the battery is fully charged, the indicator light on the charger will turn from red to green. Once the light turns green, simply unscrew the battery and it’s ready to be used again.
Vapor King USB Charger
Another charging option is the Vapor King USB Charger. Like the wall charger, you screw the threaded end of your V4L battery into it, then you plug it into the USB port on a computer. As with the wall charger, the LED tip on the battery will blink several times, and the indicator light on the charger will turn red. It takes about four to five hours to charge the battery using this charger.
Vapor King Car Adapter
The Vapor King Car Adapter is not a charger, but paired with the Vapor King USB charger you can charge Vapor King batteries in a standard 12.0 Volt car socket. Just use the USB charger as you normally would, except instead of plugging it into the computer, plug it into the USB socket on the car adapter. The V4L car adapter can also be used to power the Vapor King USB Passthrough. Simply plug the USB cord on the passthrough into the USB socket on the car adapter and you can use the passthrough on the road.
Vapor King Portable Charging Case (PCC)
The Vapor King PCC is the perfect charger for when you're on the go. It contains a rechargeable battery inside that can recharge V4L batteries. It has two indicator lights; the one on top indicates when the case is fully charged, and the one on the bottom indicates when the battery is fully charged.
To use the PCC, first charge the case itself. Simply pull the USB cord out of the case and plug it into a USB port on a computer. The top indicator light will turn red while the PCC is charging. After four to six hours, the charge is complete, and the top indicator light will turn green. Once the case is fully charged, you can then charge your batteries with the kit. It does not need to be plugged in to the computer at that time. Simply screw the threaded end of the battery into the slot at the bottom of the case. While the battery is being charged, the bottom indicator light will turn red. At that point, you may put the PCC in your pocket or purse. After four to five hours the battery will be completely charged (at which point the bottom indicator light will blink red occasionally). For each time you charge the PCC you should be able to charge a battery four to five times before it is necessary to charge the PCC again. NOTE: XL size batteries do not fit in the PCCs.
