Tank Tip tip
The drip tips provided are narrow enough to pull through the top of tank. Since the bottom of the cart doesn't lock into the tank I tried using the fatter Kalabash drip tip. Now I feel much more secure about it holding together. Hope this makes sense. I plan to try the Ming Vase tip on my tank next time I order.
Hey thanks, LiveLongAndVape. I don't recall seeing you, I've been off and on lately. Welcome to Vapor4Life Forum. I haven't started using the Tank yet, but I'm gathering little tips like you just posted in one place so I can review them. I have the tank, just been busy.
Either Morandir835 or Snowdragon are the experts on the Tank. And, many of the members are so happy with them. Others will come along and add to your comment, I'm certain.
Let me know if you need anything....I'm sort of new, but I've been here long enough to know who to ask. LOL
Welcome LiveLongAndVape. MissEmma and I were playing around with her tank last night and you have to play with it a bit to get it to "click" into the bottom and make it secure. I ordered a ming to use with mine based on Morandirs rec. The ming tips just feel good and are easier to hold in your mouth.
Thanks you guys. I'll play with it some more, oh don't you worry! :)
There's a reason certain Drip Tips which are larger in base diameter than the Cartomizers are preferred with tanks. Consider yourself lucky LiveLongAndVape, sometimes if you push the cartomizer down it will dislodge the end cap spilling juice everywhere.
It's best to place the tank on a flat surface whenever you go to install your Drip Tips. Always wet the O-Ring and turn the Drip Tip while applying downward force. This will prevent the O-Ring from getting pinched against the sharp edge of the Carto housing causing it to break.
http://www.youtube.com/watch?v=n9Q1x-f5UkQ (2:00 Mark)
I don't use a Ming DT in this video since Vapor4Life didn't carry them at the time. Most of my tanks are topped with Mings or similar DTs.