"...if it's worth producing, it's worth over-producing."
I am using the both the 1.5ohm and 2.5ohm dual coil tanks. I use the 1.5ohm @ about 3.3 and the 2.5ohm between 4.3 and 4.8. That's what I do on my awesome first DAV that works. The new one won't put power to any of the carts I've tried, including a few 3.0 single coil I had lying around. I'm pretty positive it's the battery too because i tested it with no cart on and i get the same results. It's not that it's not producing vapor, it's not trying to produce vapor I believe. (not scientific at all lol)
On the new one when I press the button (no cart) it just flashes instantly. On my working one the light is solid for the normal length of a draw then flashes. A strange thing about the new battery, I've found if I set the dial to 3.3 the light actually stays lit when pressing the button. If I turn the dial at all from 3.3 it goes back to only flashing as if the battery is dead.
*also I don't want anyone who is thinking of buying a DAV to misinterpret my issue as a reason not to. My first battery is the best I've ever had and I've tried about 10 brands from many companies. Nothing has come close to as good as my original DAV from Vapor4Life.
Last edited by skullkandy; 03-05-2013 at 06:07 PM.
Think it's the battery as well sir if it flashes like that with no load attached or the 3.0ohm sc cartos. If you get a bad/failed 1.5ohm carto it will flash like that even though there's nothing wrong with the battery.
"I know that I am hard to love, I know that I ask for far too much, but we get what we ask for sometimes, and sometimes we miss the mark. We miss the mark..."- ilyAIMY "the MARC"